OKX Wallet

List of the catalog of this article:

• 1.Yuchai 4110 engine temperature is too high and the small water tank sprays water out What is the reason
• 2、Yuchai 4110 how many horsepower
• 3,OKX Wallet What is the problem with the Yuchai 4110 engine being very water-consuming? Question
• 4. Yuchai 4110 engine parameters

What is the reason why the Yuchai 4110 engine temperature is too high and the small water tank sprays out?

First, let's see if there are bubbles in the water. In general, the cylinder pad is flushed, just change the cylinder pad. Another rare case is that the cylinder head is deformed and has cracks. The cover of the pump is broken. 3 There are cracks in the combustion chamber at the top of the cylinder liner.

The main reason for this phenomenon is that there are large sand marks or cracks in the cylinder pad (wet cylinder liner) or cylinder liner and cylinder head.

There are many reasons: too much antifreeze is added to the vehicle. The internal pressure of the circulating water tank is too high. The antifreeze circulation pipeline is blocked. The above reasons will cause the antifreeze to be sprayed, and the antifreeze spray will seriously affect the cooling system of the vehicle and cause the engine to have a high temperature.

Generally, there are five situations: when the diesel car refuels, the water tank mouth will spray water and there is gas in the water. The water tank is completely full. After the water temperature rises, it is normal to spray water once due to expansion and refueling. If the engine temperature is too high, the water will boil, and the boiling water and water vapor will continue to spray out of the water tank mouth.

How much horsepower is Yuchai 4110

How much horsepower is Yuchai 4110? This engine has 135 horsepower.Horsepower can be converted into success rate, and power is an important parameter to measure engine performance. Power is used to measure how much work the engine does per unit time. The greater the power, the more work the engine does per unit time. The higher the power, the stronger the engine performance.

One is YC4E140-33 is 140 horsepower, 105kw*36 is 140 horsepower, the rated speed is 2800 rpm, the idle speed is 700-750 rpm, the maximum output torque is 430N/M, and the maximum torque speed range is 1300-170 0, the economic speed range is 1700-2200.

This engine has 135 horsepower. Horsepower can convert the success rate, and power is an important parameter to measure engine performance. Power is used to measure the workload of the engine unit in time.The higher the power, the more the engine unit works in time. The higher the power, the stronger the engine performance. Power is related to the speed and torque of the engine.

This engine has 135 horsepower. Horsepower can be converted into a success rate, and power is an important parameter used to measure engine performance. Power is used to measure how much work the engine does per unit time. The higher the power, the more work the engine does per unit time. The higher the power, the stronger the engine performance.

This engine has 135 horsepower. Horsepower can be converted into a success rate, and power is the most important main parameter used to measure engine performance. Power is used to measure how much work the engine does per unit time. The greater the power, the more work the engine does per unit time. The higher the power, the stronger the engine performance.

What's the problem with the Yuchai 4110 engine that consumes a lot of water

1. The water consumption of the engine is mainly caused by cylinder compression and friction heating, so the water consumption means that the engine load is large, which may It is caused by a large long-term workload or a lack of lubricating oil in the gearbox. The cylinder piston rubs with the cylinder block, and there may be a problem with the piston ring.

2. Check whether the antifreeze is lacking, resulting in high engine water temperature. The circulation of the coolant, whether the circulation is not smooth. Secondly, it can also be checked that water temperature sensors, water pumps, thermosters, cooling fans, etc. can all lead to high water temperature. If your hands-on ability is not very strong, you'd better go to the repair shop for inspection.

3. Does Yuchai 4110 have a top-up medium cold? Is it water-cooled? I haven't seen it in the past few years... Generally, the Yuchai 4110 machine is front-cooled as long as it is equipped with medium cooling.

4. Causes of the supply system Causes caused by the air supply system Diesel engines are relatively empty. When the air supply system is blocked, the empty ratio will increase. The diesel engine is too large, and the insufficiently burned diesel is cracked into carbon particles and discharged into the atmosphere, which is the black smoke seen.

5. Water leakage, maybe the place where the water leaks is very secret and the leakage is slow, such as the water pump pulley.

Yuchai 4110 engine parameters

1. One is YC4E140-33 is 140 horsepower, 105kw*36 is 140 horsepower, the rated speed is 2800 rpm, the idle speed is 700-750 rpm, the maximum output torque is 430N/M, the maximum torque speed range is 1300-1700, and the economic speed range is 1700-2200.

2. Yuchai 4110 currently has two types, one is YC4E140-33 is 140 horsepower, 105kw*36 is 140 horsepower, the rated speed is 2800 rpm, the idle speed is 700-750 rpm, the maximum output torque is 430N/M, and the maximum torque The speed range is 1300-1700, and the economic speed range is 1700-2200.

3. This engine has 135 horsepower. Horsepower can convert the success rate, and power is an important parameter to measure engine performance. Power is used to measure the workload of the engine unit in time.The higher the power, the more the engine unit works in time. The higher the power, the stronger the engine performance. Power is related to the speed and torque of the engine.

4. The supercharged engine of Yuchai 4110 belongs to the old national second engine, and the engine horsepower is 135 horsepower. The old Yuchai 4110 supercharged engine model is: YC4E135-21.

5. This engine has 135 horsepower. Horsepower can be converted into a success rate, and power is an important parameter used to measure engine performance. Power is used to measure how much work the engine does per unit time. The higher the power, the more work the engine does per unit time. The higher the power, the stronger the engine performance.

6. This engine has 135 horsepower. Horsepower can be converted into success rate, and power is an important parameter to measure engine performance.Power is used to measure how much work the engine does per unit time. The greater the power, the more work the engine does per unit time. The higher the power, the stronger the engine performance. Power is related to engine speed and torque.