OKX Wallet login

Engine oil-water separator (engine nebulizer,OKX Wallet login providing the best lubrication for your engine) With the continuous development of automobiles and other means of transportation, the performance of the engine is getting higher and higher, and the working conditions of lubricating oil are also getting better and better. The more severe.Therefore, the importance of oil-water separator (engine nebulizer) is also becoming more and more prominent. It can provide the best lubrication and effectively protect the engine, which is a must-have configuration for automobile manufacturers. Engine oil-water separator (engine nebulizer) has the following advantages: 1. Save fuel. The oil-water separator can optimally control the amount of lubricating oil without wasting excess oil. Two. Prevent the engine from being damaged due to poor lubrication. The oil-water separator can ensure the best effect of lubricating oil and better protect the engine. 3. It has further improved the capacity and cooling effect of the engine. The oil-water separator can avoid the mixing of oil, so it can lower the temperature of the cooling pipe and the piston at the bottom of the engine, reduce the accumulation of heat, and further improve the capacity and cooling effect of the engine. Four. It can improve the stability of the engine.The higher the lubrication capacity of the oil-water separator, the higher the stability of the engine. 5. Prevent environmental pollution. The oil of the oil-water separator is used for a long time, which can ensure the air quality of the car and prevent pollution of the environment. The working principle of the oil-water separator (engine nebulizer): The oil-water separator is composed of a rotating drum and a layer of fine mesh filtration. With the assembly of appropriate materials and components, the lubricating oil is discharged from the drum, and the water and dirt are filtered out. Over time, it will gather and discharge the drum by itself. When the lubricating oil in the drum reaches a certain level, it will automatically discharge the drum. In this way, the floating matter can be discharged with the lubricating oil without a trace with the flow rate. This process can reduce turburence and achieve the efficient flow of oil. Maintenance and upkeep of oil-water separator (engine atomizer): 1.It should be cleaned every certain time, preferably checked once a month. Two. Change the oil regularly. 3. Check and replace the hardened parts inside the oil. Four. Make sure that the filter is undamaged and kept clean. 5. Check the degree of blockage of the filter. 6. For the new car, before using the oil-water separator for the first time, please add lubricating oil according to the agreed amount and run for 10 to 20 minutes. At this time, there may be some bubbles. This is a normal phenomenon. Don't worry. The oil will gradually cover it. Finally, the oil surface will be clean and foam-free, indicating that the oil-water separator has been turned on. Begin to work normally. In a word, the function of oil-water separator (engine atomizer) is becoming more and more important with the development of the automobile market, and it is also more and more important to keep it clean and intact. Maintaining it can improve the safety and reliability of the car, extend the service life of the car, and also protect the environment.Therefore, please pay attention to the maintenance of the oil-water separator (engine atomizer) when using the vehicle.

Contact Us
Phone：020-83484676